Industrial Automation & Fluid Control

 

Industrial processing facilities use automated valve systems to control fluid distribution, isolate equipment, and manage production processes. Pneumatic ball valves are commonly used in applications requiring remote on-off operation, centralized control, and coordinated switching across multiple pipeline circuits.
Bergamo Valve supplies pneumatic ball valves and automated valve assemblies for industrial piping systems, process automation, and fluid distribution. Pneumatic actuators can be fitted to compatible ball valve designs, with double-acting or spring-return operation and control accessories for integration with PLC, DCS, and pneumatic control systems.

 

Typical Applications in Automated Fluid Control

Bergamo Valve pneumatic ball valves are suitable for automated piping networks and industrial process systems:

Automated Piping Systems

Centralized fluid distribution networks for industrial water, cooling circuits, compressed air, and nitrogen utility lines.

01

Pneumatic On/Off Control Loops:

Automated batching systems, quarter-turn shutoff circuits, and bypass pipelines controlled by pneumatic actuators.

02

Industrial Fluid Transfer

Chemical dosing lines, solvent transfer systems, utility water distribution, and process manifold switching.

03

Process Flow Isolation

Automated shutoff for reactor feed lines, mixing vessels, equipment connections, and storage tank filling systems.

04

Emergency Isolation

Pneumatic shutoff arrangements for process lines requiring remote isolation. Actuator fail-safe positions are selected according to the process safety requirements.

05

 

Recommended Ball Valve Configurations for Industrial Automation

 

Bergamo Valve supplies floating and trunnion ball valve designs for industrial fluid control. Pneumatic actuation is a key configuration for applications requiring automated on-off operation.


Floating Ball Valve
Floating ball valves use line pressure to push the ball against the downstream seat, providing shutoff in industrial process pipelines. Their compact structure makes them suitable for many small- and medium-sized automated piping systems.
• Pneumatic Ball Valve: Combines a compatible floating ball valve with a pneumatic actuator for remote on-off operation. Double-acting actuators use compressed air for both opening and closing, while spring-return actuators use spring force for the return stroke when air pressure is lost. Common body material options include carbon steel and stainless steel, subject to the selected valve specification.
• Carbon Steel Ball Valves: Carbon steel floating ball valves are used in general industrial utility lines and compatible process fluid systems. Cast and forged body designs can be selected according to pressure rating, connection type, and operating conditions. Pneumatic actuators can be fitted where automated operation is required.

 

Trunnion Ball Valve
For larger pipeline sizes and higher-pressure process systems, trunnion ball valves provide a supported ball structure that helps reduce operating torque under line pressure. Pneumatic actuation can be specified for compatible valve configurations when automated isolation is required.

 

 
Operating Media & Control Conditions
 

Pneumatic ball valves are used in industrial systems handling different fluids and operating conditions:

01/

Operating Media: Compressed air, industrial water, compatible solvents, lubricating oils, neutral gases, and selected chemical fluids. Steam service requires suitable body, seat, and sealing materials.

02/

Pressure & Temperature: Allowable pressure and temperature depend on the valve body material, seat material, sealing design, and actuator specifications. These limits should be confirmed against the required operating conditions.

03/

Operating Frequency: Applications involving frequent opening and closing require actuator sizing based on valve torque, air supply pressure, and operating frequency.

04/

Remote Control: Pneumatic actuators can receive control commands through solenoid valves and provide open/closed position feedback through limit switch devices connected to PLC or DCS systems.

 

Technical Configurations & Automation Accessories

 

Bergamo Valve pneumatic ball valve assemblies can be configured with suitable mounting interfaces, actuators, and control accessories:


ISO 5211 Actuator Mounting: Compatible valve mounting interfaces allow pneumatic actuators to be installed directly or through suitable mounting components. Interface dimensions should be matched to the actuator before assembly.


Actuator Options: Double-acting and spring-return rack-and-pinion pneumatic actuators are common options. Actuator sizing takes into account valve operating torque, air supply pressure, and the required fail-safe position.


Control Accessories Package:
• Solenoid Valves: NAMUR-interface solenoid valves can be used to control actuator air supply through electrical signals. Valve type and voltage are selected according to the control system.
• Limit Switch Boxes: Provide visual valve position indication and electrical open/closed feedback signals for PLC or DCS monitoring.
• Air Filter Regulators: Filter and regulate the compressed air supplied to pneumatic actuators.
• Valve Positioners: Used when the application requires intermediate valve positioning rather than simple on-off operation. Positioner signal type and valve control characteristics should be specified during selection.

 

Industry Standards & Quality Compliance

Bergamo Valve supplies pneumatic ball valve assemblies according to applicable valve specifications and automation interface requirements.

 
 

ISO 5211

Actuator mounting interfaces can be specified for compatible valve configurations.

 
 
 

NAMUR VDI/VDE 3845

Applicable interfaces for mounting solenoid valves and position indicators on compatible pneumatic actuators.

 
 
 

CE / PED

Applicable conformity documentation is confirmed according to the product scope and project requirements.

 

 

FAQ

 

 

Q: How do I choose between Double-Acting and Spring-Return pneumatic actuators?

A: Double-acting actuators use compressed air for both opening and closing. They are suitable for standard automated on-off applications where a preset spring-driven return position is not required. Spring-return actuators use air pressure for one stroke and spring force for the other. When air pressure is lost, the spring moves the valve toward its preset Fail-Open or Fail-Closed position. Selection depends on valve operating torque, available air pressure, and the required process safety position.

Q: What are the benefits of an ISO 5211 mounting interface for pneumatic ball valves?

A: ISO 5211 standardizes the mounting dimensions between industrial valves and actuators. A compatible interface simplifies actuator installation and replacement and reduces the need for separately designed mounting arrangements. The valve and actuator mounting dimensions and drive connection must be matched before assembly.

Q: Can pneumatic ball valves be used for modulating or throttling control?

A: Pneumatic ball valves can be equipped with a positioner to receive control signals, such as 4–20 mA, and move the valve to intermediate positions. However, standard on-off ball valves are primarily intended for isolation rather than precise flow regulation. Applications requiring continuous throttling should use a valve design with suitable flow characteristics, such as a characterized ball or V-port design, subject to product availability and process requirements.