Flanged Trunnion Ball Valve
Flanged Trunnion Ball Valves for Pipeline Isolation
Bergamo Valve manufactures flanged trunnion ball valves for industrial fluid isolation in oil and gas, petrochemical, power generation, and general process systems. The product range covers soft-seated, buried-type, reduced-bore, stainless steel, and carbon steel configurations.
Flanged connections provide bolted joints for installation in industrial piping systems. Available configurations include different pressure classes, bore designs, seat materials, body constructions, and operating methods for a range of fluid and operating conditions.
-
Soft Seated Flanged Trunnion Ball ValveOur soft-seated flanged trunnion ball valves feature a trunnion-mounted ball, spring-loaded seats, and a Double Block and Bleed (DBB) design. Available in sizes from 2" to 48" (DN50–DN1200) and...read more
-
Buried Type Flanged Trunnion Ball ValveThe Buried Type Flanged Trunnion Ball Valve is designed for direct underground installation without requiring a valve chamber. Its extended stem brings the operating point above ground, while...read more
-
Reduced Bore Flanged Trunnion Ball ValveOur reduced bore flanged trunnion ball valves are available in sizes from 2" to 24" (DN50–DN600) and pressure ratings from ASME Class 150 to Class 1500. The flow passage is one nominal size...read more
-
Stainless Steel Flanged Trunnion Ball ValveOur Stainless Steel Flanged Trunnion Ball Valves cover sizes from 2" to 24" (DN50–DN600) and pressure ratings from ASME Class 150 to Class 2500. Available configurations include CF8, CF8M, and...read more
-
Carbon Steel Flanged Trunnion Ball ValveOur Carbon Steel Flanged Trunnion Ball Valves are available in sizes from 2" to 48" (DN50–DN1200) and pressure ratings from ASME Class 150 to Class 2500 and PN16 to PN420. Configurations include...read more
Flanged Trunnion Ball Valve Product Range
The product range covers different material, sealing, bore, and installation requirements.
Soft Seated Flanged Trunnion Ball Valve
Uses soft seat materials to provide shut-off for compatible process media. Seat material selection depends on operating temperature, pressure differential, and fluid compatibility.
Buried Type Flanged Trunnion Ball Valve
Configured for underground pipeline installation. The design can incorporate an extended stem and ground-level operating arrangement to allow valve operation from above the buried pipeline, according to installation depth and project requirements.
Reduced Bore Flanged Trunnion Ball Valve
Features a reduced flow passage compared with the nominal pipeline diameter. This configuration is used where a reduced bore is acceptable for the pipeline flow requirements and installation arrangement.
Stainless Steel Flanged Trunnion Ball Valve
Uses stainless steel for the valve body to meet corrosion-resistance requirements in compatible process services. Material grades and internal components are selected according to the process medium and operating conditions.
Carbon Steel Flanged Trunnion Ball Valve
Uses a carbon steel body for industrial pipeline applications involving compatible process media. Body material, pressure class, seat materials, and internal components are matched to the specified pressure and temperature conditions.
Flange Connection Standards and Dimensions
Flanged trunnion ball valves are connected to pipeline flanges using bolted joints. Flange dimensions, pressure class, facing type, and valve face-to-face dimensions must match the piping specification.
Flange Standards
• ASME B16.5: Flange dimensions and pressure classes for applicable NPS sizes.
• ASME B16.47: Large-diameter steel flanges in applicable Series A or Series B configurations.
• EN 1092-1: European flange dimensions and PN pressure designations, where specified for the valve model.
Flange Facing
• Raised Face (RF): Commonly used for bolted flange connections in industrial piping systems.
• Ring Type Joint (RTJ): Uses a metal ring gasket for applicable high-pressure flange connections.
• Flat Face (FF): Available where required by the mating flange and piping specification.
Pressure Class and Dimensions
Pressure classes and nominal sizes are selected according to the valve design and applicable standard. Available configurations depend on the product model.
|
Specification |
Available configuration |
|
Pressure Class |
ASME Class according to valve model and design |
|
Nominal Size |
NPS / DN according to product range |
|
Flange Standard |
ASME, EN, or project-specified standard |
|
Flange Facing |
RF, RTJ, or other specified facing |
|
Face-to-Face |
According to the applicable valve design and dimensional standard |
Flange outside diameter, bolt circle diameter, bolt-hole quantity, and face-to-face dimensions are matched to the specified connection standard and valve design.
Valve Design And Configuration Options
Actuator sizing is based on valve torque and differential pressure. Pneumatic actuators are matched to the available air supply, while electric actuators are matched to the available power supply.
Bore Design
• Full Bore: Flow passage generally matches the nominal pipe diameter. Suitable for lower flow restriction and pipeline pigging where the passage allows pig passage.
• Reduced Bore: Smaller flow passage than the nominal pipe diameter. Used where the required flow capacity does not call for a full-bore design.
Seat Design
• Soft Seated: PTFE seats are commonly used for water, oils, natural gas, and compatible chemicals, with typical service temperatures up to approximately 180°C. PTFE offers greater stiffness and resistance to deformation under load.
• Metal Seated: Stainless steel sealing surfaces with Stellite or tungsten carbide hard-facing are used for abrasive fluids, solid-particle service, and elevated temperatures where polymer seats are unsuitable.
Body Construction
• Side Entry: Internal components are assembled through the side sections of the valve body. Commonly used in general industrial applications.
• Top Entry: Internal components can be accessed through the top cover, allowing maintenance without removing the entire valve body from the pipeline.
Operating Options
• Manual: Lever operation for lower-torque valves; gearbox operation for larger valves or higher operating torque.
• Pneumatic: Double-acting actuators for air-driven opening and closing; spring-return actuators for fail-open or fail-close operation.
• Electric: Electric actuators for remote on/off operation and integration with plant control systems.
Materials and Sealing Options
|
Component |
Common Materials |
Typical Service |
|
Cast Carbon Steel Body |
ASTM A216 WCB |
Water, oil, gas, general process fluids |
|
Low-Temperature Carbon Steel |
ASTM A352 LCB |
Low-temperature service |
|
Stainless Steel Body |
ASTM A351 CF8 / CF8M |
Compatible with corrosive fluids |
|
Forged Components |
ASTM A105 / A182 F304 / F316 |
Pressure-containing and corrosion-resistant components |
|
Ball and Stem |
SS304, SS316, 17-4PH |
Corrosion resistance and mechanical strength |
|
Soft Seats |
PTFE, RPTFE, PEEK |
Compatible liquids and gases |
|
Metal Seats |
Stellite, tungsten carbide hard-facing |
Abrasive and high-temperature service |
For wet H₂S service, material selection and hardness limits must meet applicable NACE MR0175/ISO 15156 requirements.

Natural Gas Transmission and Distribution
Installed at gas transmission branch lines, compressor station inlet and outlet connections, and distribution pipeline isolation points. Full-bore valves are used where lower flow restriction or pipeline pigging is required. Buried pipeline sections can use extended-stem configurations for ground-level operation.
Crude Oil Transfer and Storage
Used on crude oil transfer lines, storage tank inlet and outlet connections, and pump discharge piping. Carbon steel bodies with soft seats are commonly used for compatible crude oil services. Metal-seated configurations are suitable for applications involving abrasive particles or elevated temperatures.
Refinery and Petrochemical Process Lines
Applied to hydrocarbon feedstock lines, refined product transfer systems, refinery process piping, and equipment isolation connections. Carbon steel configurations are commonly used for general hydrocarbon services, while stainless steel body configurations are available for compatible corrosive media.
Underground Utility and Energy Networks
Installed in buried natural gas distribution lines and underground energy networks. Extended stems provide access to the operating mechanism from ground level, while external corrosion protection helps protect valve surfaces exposed to soil conditions.
High-Pressure Process and Isolation Systems
Used at high-pressure gas and liquid connections in processing facilities and industrial piping systems. Pressure-rated trunnion ball valves with suitable flange connections, including RTJ configurations, are used where specified by the piping design.
Buried Installation and Operating Arrangements
Buried flanged trunnion ball valves require operating and protection arrangements suited to underground installation.
Stem Extension: Positions the operating point above ground level for access to the buried valve.
Operating Arrangement: Gear-operated extensions or other suitable mechanisms allow manual operation from ground level.
External Protection: Protective coating systems help protect external valve surfaces against soil exposure and corrosion.
Valve Chamber: Provides access to the operating mechanism and stem extension where required by the installation.
The stem extension length, operating mechanism, coating system, and chamber arrangement are matched to the installation depth and site layout.
Flange Alignment: Matching flange standards, nominal sizes, facing types, and bolt patterns prevents connection mismatches.
Gasket Compatibility: RF, RTJ, and FF connections require corresponding gasket types and sealing arrangements.
Installation Clearance: Space is required for gearbox operation, actuator movement, and access to connected accessories.
Valve Removal: Adequate clearance around the valve and adjacent piping facilitates inspection, removal, and replacement.
Actuator Access: Pneumatic and electric configurations require room for air connections, wiring, control accessories, and servicing.
For replacement installations, face-to-face dimensions and flange drilling are particularly important for matching existing pipework.

Replacement and Project Requirements
For replacement orders, the following details help match the existing valve and avoid connection or installation mismatches:
• Nameplate, model, and valve size
• Pressure class and flange standard
• Face-to-face dimension and bolt pattern
• Bore size and body construction
• Body, ball, stem, and seat materials
• Actuator type and mounting dimensions
Project documentation can include technical datasheets, GA drawings, Material Test Reports (MTRs), pressure test records, dimensional inspection reports, and specified NDT reports.
Third-party inspection and customer witness testing can be arranged according to project inspection requirements.
FAQ
As one of the most professional flanged trunnion ball valve manufacturers and suppliers in China, our products have good reputation in the market. Please feel free to wholesale durable flanged trunnion ball valve for sale here from our factory. Quality products and reasonable price are available.
