Forged Steel Trunnion Ball Valve

Forged Steel Trunnion Ball Valves for High-Pressure Industrial Applications

 

Bergamo Valve manufactures forged steel trunnion ball valves for pipeline isolation and process applications in oil and gas, LNG, refining, and petrochemical facilities. The product range includes Side Entry, Top Entry, and Fire Safe configurations for different structural, maintenance, and sealing requirements.
Valve specifications can be selected according to nominal size, pressure class, design temperature, process medium, material, seat design, and end connection. Manual, pneumatic, and electric operation are available according to valve design and project requirements.

 

 
 
Forged Steel Trunnion Ball Valve Product Range

 

Side Entry Forged Steel Trunnion Ball Valve
The side entry design allows internal components to be assembled through the side sections of the valve body. It is used for pipeline isolation in oil and gas transmission, LNG facilities, refineries, and petrochemical process systems. Valve size, pressure class, seat materials, and operating method are selected according to the specified service conditions.

 

Top Entry Forged Steel Trunnion Ball Valve
The top entry design provides access to internal valve components through the top cover. This construction allows inspection and maintenance of the ball, seats, and other internal parts from above, subject to the valve design and installation arrangement. It is suitable for pipeline and process systems where in-line maintenance access is an important consideration.

 

Fire Safe Forged Steel Trunnion Ball Valve
Fire safe configurations are specified for services where valve performance under fire exposure is part of the project safety requirements. The design incorporates sealing arrangements intended to limit leakage if primary soft sealing components are damaged by heat. Applicable fire test standards and documentation should be confirmed against the supplied valve design and project specification.

 

Forged Steel Materials and Construction

 

Forged steel materials are selected according to pressure, temperature, medium, and corrosion conditions. Body, closure, ball, stem, and other wetted components may use different material grades as specified.

Material

Typical Selection

ASTM A105

Carbon steel components for general industrial service

ASTM A350 LF2

Low-temperature carbon steel applications

ASTM A182 F304

Stainless steel components for specified corrosion conditions

ASTM A182 F316

Stainless steel components where additional corrosion resistance is required

Material selection should consider operating temperature, fluid composition, corrosion exposure, and project requirements. For wet H₂S service, material selection should follow applicable NACE MR0175/ISO 15156 requirements.
For low-temperature service, the seat, stem packing, gaskets, and other sealing components must also be suitable for the specified minimum design metal temperature (MDMT). 

 

Side Entry vs. Top Entry Forged Steel Trunnion Ball Valves

 

Side entry and top entry refer to different valve body construction and internal access arrangements. Selection mainly depends on valve design, installation layout, and maintenance requirements.

Consideration

Side Entry

Top Entry

Internal access

Through the side body construction

Through the top cover

Maintenance

Requires suitable access around the valve body

Requires sufficient clearance above the valve

Installation space

Consider surrounding pipework and side clearance

Consider top-side removal and lifting space

Selection

Based on pipeline layout and maintenance access

Suitable where top-side access is preferred

 

Top Entry Forged Steel Trunnion Ball Valve

 

Fire Safe Design And Sealing Configuration

Primary and Secondary Sealing
• Primary Seat Sealing: Seat materials such as PTFE or other specified polymers provide normal operating shut-off according to media compatibility, pressure, and temperature limits.
• Secondary Sealing: Additional metal-to-metal contact or auxiliary sealing arrangements are incorporated into applicable designs to help control leakage if primary soft sealing components are damaged by fire exposure.
• Stem Sealing: Stem sealing arrangements are selected to limit external leakage under the specified operating and test conditions.


Fire Safe Standards and Testing
Fire safe requirements may specify standards such as:
• API 607: Fire testing requirements for applicable quarter-turn valves and valve configurations.
• API 6FA: Fire testing requirements for applicable pipeline valves.

 

Pressure, Temperature and Valve Configuration

 

Valve configuration should be selected according to the pipeline design conditions and installation requirements.

Selection Parameter

Available Options or Requirements

Pressure Rating

ASME Class 150, 300, 600, 900, 1500, 2500, subject to product design

Nominal Size

NPS / DN according to pipeline specifications

Bore Design

Full bore or reduced bore

Seat Design

Soft-seated or metal-seated

Body Material

Carbon steel, low-temperature carbon steel, or stainless steel

End Connection

Flanged, butt weld, or other specified connections

Operation

Manual, gear-operated, pneumatic, or electric

 

Typical Applications and Service Conditions

 

Forged steel trunnion ball valves are used for isolation duties in pipeline and process systems. Valve configuration is selected according to installation location, process medium, and operating conditions.

Application

Typical Service Locations

Selection Considerations

Oil & Gas Transmission

Natural gas pipelines, compressor station inlet and outlet lines, pipeline block valve stations

Pressure class, bore design, body material, and operating method

LNG Facilities

LNG process piping, gas handling lines, and associated isolation points

Low-temperature material suitability, seat performance, and sealing requirements

Refinery Operations

Crude oil transfer lines, refined product pipelines, and process equipment connections

Media compatibility, pressure and temperature ratings, and seat materials

Petrochemical Plants

Hydrocarbon feed lines, chemical transfer systems, and process isolation points

Corrosion resistance, material selection, and operating conditions

Offshore Facilities

Hydrocarbon process piping, utility lines, and equipment isolation systems

Project material requirements, corrosion exposure, and fire-safe specifications

 

Testing and Project Inspection Requirements

 

Typical inspection and testing items include:

Test or Inspection

Purpose

Shell Pressure Test

Checks pressure-containing body integrity

High-Pressure Seat Test

Checks seat sealing performance under specified pressure

Low-Pressure Gas Test

Checks sealing performance at low pressure, when specified

Dimensional Inspection

Verifies key dimensions and connection interfaces

Non-Destructive Testing (NDT)

Inspects specified material or weld areas, where applicable

Low-Temperature Test

Verifies performance under specified low-temperature conditions

Fire Type Test Documentation

Supports fire-safe design verification when required

 

Project documentation can include:
• Material Test Reports (MTR)
• Pressure test records
• Dimensional inspection reports
• NDT reports
• Low-temperature test reports
• Fire test documentation, where applicable
Third-party inspection and customer witness testing can be arranged according to the purchase order and inspection plan. The required test items and documents should be confirmed before order placement. 

 

 

Project Procurement And Replacement Requirements

For new projects, provide the following information to help determine the valve configuration:
• Valve size and pressure class
• Design and operating pressure and temperature
• Medium and fluid composition
• Side Entry or Top Entry construction
• Body, ball, stem, and seat materials
• Full Bore or Reduced Bore
• End connection and operation method
• Fire Safe, DBB, DIB, or other functional requirements
• Required inspection and documentation
For replacement orders, provide the existing valve nameplate, datasheet, or general arrangement drawing where available. Key details include valve size, pressure class, face-to-face dimensions, flange drilling, bore, materials, actuator mounting, and required safety functions.
For valves with special isolation requirements, the seat arrangement, pressure direction, and cavity relief configuration should also be checked to confirm functional compatibility.

Fire Safe Forged Steel Trunnion Ball Valve

 

 

FAQ

 

 

Q: What is the difference between forged steel and cast steel trunnion ball valves?

A: Forged steel valves use forged pressure-containing components, while cast steel valves use cast components. The appropriate construction depends on valve design, size, pressure and temperature requirements, material specification, and project standards. Procurement should compare the specified material grade and design requirements rather than selecting by manufacturing method alone.

Q: What is the difference between Side Entry and Top Entry forged steel ball valves?

A: Side Entry valves are assembled through the side sections of the valve body, while Top Entry valves provide access to internal components through the top cover. Top Entry designs can be considered where maintenance access from above is required. Installation clearance and the actual valve construction should be reviewed before selection.

Q: When should I choose a Fire Safe forged steel trunnion ball valve?

A: Choose a fire safe configuration when the project specification or process safety requirements call for fire-tested valve performance. Confirm the applicable standard, such as API 607 or API 6FA, and request the relevant test documentation for the supplied valve design.

Q: Which forged steel materials are suitable for low-temperature service?

A: ASTM A350 LF2 is a commonly specified low-temperature carbon steel material. The required grade and impact testing depend on the minimum design metal temperature and project specification. Seats, seals, gaskets, and other components must also be suitable for the specified temperature.

Q: Can forged steel trunnion ball valves be equipped with pneumatic or electric actuators?

A: Yes. Pneumatic and electric actuators can be specified according to valve torque, differential pressure, operating frequency, and plant control requirements. The required fail position, power or air supply, and control accessories should be confirmed during actuator sizing.

Q: What information is required for a forged steel trunnion ball valve quotation?

A: Provide the valve size, pressure class, design pressure and temperature, process medium, body and seat materials, side-entry or top-entry construction, bore type, end connection, and operating method. For project orders, include the datasheet and inspection requirements. For replacement orders, an existing nameplate or GA drawing is also useful.

As one of the most professional forged steel trunnion ball valve manufacturers and suppliers in China, our products have good reputation in the market. Please feel free to wholesale durable forged steel trunnion ball valve for sale here from our factory. Quality products and reasonable price are available.