Oil & Gas Industry

 

Oil and gas pipeline and processing systems require reliable valves for isolating crude oil, natural gas, and other hydrocarbon fluids. These applications involve high pressure, temperature variations, corrosive media, and demanding sealing requirements.
Bergamo Valve supplies ball valves for upstream, midstream, and downstream oil and gas applications. The product range includes forged steel trunnion ball valves, flanged trunnion ball valves, and trunnion ball valves for pipeline and process isolation.

 

 
Typical Applications & Piping Systems
 

Ball valves are used in the following oil and gas installations:

01/

Onshore Oil & Gas Production: Wellhead manifolds, production gathering lines, separator inlet and outlet pipelines, and production equipment isolation.

02/

Offshore Platforms & FPSOs: Production manifolds, process piping, riser connections, and seawater injection systems. Marine exposure and corrosion resistance are important considerations for material selection.

03/

Oil & Gas Processing Facilities: Gas dehydration units, amine sweetening plants, hydrocarbon separation systems, and metering skids.

04/

Storage Terminals & Tank Farms: Crude oil tank connections, transfer manifolds, pump discharge lines, and marine loading systems.

 

Recommended Ball Valve Types for Oil & Gas

 

Bergamo Valve supplies ball valves for oil and gas pipeline and processing applications. Trunnion ball valves are an important product for these applications, with forged steel and flanged designs serving different pipeline and process requirements.

 

Trunnion Ball Valve
Trunnion ball valves use upper and lower supports to hold the ball in position. The seats move against the ball to provide sealing. This design is commonly used in medium- and large-diameter pipelines, gas processing lines, and hydrocarbon transfer systems.

 

Forged Steel Trunnion Ball Valve
The forged steel body provides a pressure-containing structure for pipeline and process applications. The trunnion-supported ball carries pressure-induced loads and helps reduce operating torque. Typical applications include wellhead manifolds, high-pressure production lines, and gas transportation pipelines. Common body materials include ASTM A105 and ASTM A350 LF2.

 

Flanged Trunnion Ball Valve
Flanged trunnion ball valves connect to pipelines and equipment through bolted flange connections. The trunnion-supported ball provides stable operation under line pressure. Typical applications include process plant piping, metering skids, separator connections, and pump discharge lines. Flange dimensions and pressure ratings follow the applicable ASME or DIN requirements.
Trunnion ball valves can also incorporate functions such as Double Block and Bleed (DBB). This function uses two independent sealing barriers and an intermediate cavity bleed to allow pressure release between the sealing points.

 

Operating Media & Extreme Conditions

 

Oil and gas ball valves handle different hydrocarbon fluids and operating conditions:


Operating Media: Crude oil, natural gas, wet gas, sour gas (H₂S), hydrocarbon condensates, multiphase fluids, and produced water.


Pressure Ratings: ASME Class and PN ratings are selected according to the pipeline design pressure and operating temperature.


Temperature Range: Temperature limits depend on the body, seat, and seal materials. ASTM A350 LF2 is used for specified low-temperature applications.


Severe Conditions: High differential pressure, pressure fluctuations, sand erosion, thermal cycling, and sulfide stress cracking (SSC) in sour service.


For H₂S-containing media, material selection must meet the applicable requirements of NACE MR0175 / ISO 15156. For abrasive service, seat materials and internal surface protection require particular attention.

 

Valve Materials & Technical Configurations

 

Material and configuration selection affects pressure containment, corrosion resistance, and sealing performance.


Body Materials: Forged Carbon Steel (ASTM A105, ASTM A350 LF2), Cast Carbon Steel (ASTM A216 WCB, ASTM A352 LCC), and Duplex Stainless Steel (F51 / UNS S31803, F53 / UNS S32750).


Seat & Seal Configurations:
• Soft Seats: PTFE, reinforced PTFE, PEEK, and Devlon for applications requiring tight shutoff and suitable fluid compatibility.
• Metal-to-Metal Seats: HVOF tungsten carbide or chromium carbide coatings for abrasive and elevated-temperature service.


Safety Features:
• Anti-Blowout Stem design to prevent stem ejection under internal pressure.
• Anti-Static devices to provide electrical continuity between the ball, stem, and body.
• Emergency Sealant Injection System for backup sealing at designated stem and seat sealing areas.

 

Industry Standards & Compliance
Oil and gas ball valves are specified according to the applicable pipeline and project requirements. API 6D is a key reference for pipeline valve design, manufacturing, and testing.
Bergamo Valve holds an API 6D Monogram License (No. 6D-1999). The applicable product scope and technical requirements should be confirmed against the project specification.

 

FAQ

 

 

Q: Should I choose a forged steel or cast steel trunnion ball valve for an oil and gas pipeline?

A: Choose a forged steel valve when the project requires a forged body, particularly for critical pressure-containing applications. Cast steel valves are also widely used in pipeline systems. The choice depends on valve size, pressure rating, material grade, operating temperature, and project specifications.

Q: What does DBB mean in a trunnion ball valve?

A: DBB stands for Double Block and Bleed. It provides two separate sealing barriers when the valve is closed, with a bleed point between them to release cavity pressure and check the sealing condition.

Q: What information is needed to select a ball valve for sour gas service?

A: Provide the H₂S concentration or partial pressure, operating pressure, temperature, and material specification so the valve body, internal components, and bolting can be checked against the applicable NACE MR0175 / ISO 15156 requirements.

Q: Which seat material should I choose for oil and gas ball valves?

A: PTFE and reinforced PTFE are commonly used for general sealing, while PEEK and Devlon suit applications requiring different mechanical or temperature properties. Metal seats are used for abrasive or elevated-temperature service. The choice depends on the fluid, pressure, temperature, and sealing requirements.