Our Side Entry Forged Steel Trunnion Ball Valves feature a forged split-body construction, trunnion-mounted ball, and spring-loaded seats. The bolted body design provides access to replaceable seats, sealing components, and stem packing without removing the entire valve from the pipeline.
Available in sizes from 2" to 48" (DN50–DN1200) and pressure ratings from ASME Class 150 to Class 2500, these valves offer RF, RTJ, and BW end connections for high-pressure pipeline and process isolation applications.
Side Entry Forged Steel Trunnion Ball Valve Construction and Maintenance
Key structural features include:
- Forged Split Body: Bolted body construction with replaceable internal components.
- Trunnion-Mounted Ball: Upper and lower trunnion supports with bearing assemblies.
- Spring-Loaded Seats: Spring-loaded seat rings with replaceable seat inserts and sealing elements.
- Replaceable Sealing Components: Seat seals, body gaskets, and stem packing.
- Anti-Blowout Stem: Integral T-head stem or stem shoulder retention; retaining ring arrangement available as a configurable design.
- Anti-Static Device: Spring-loaded conductive contacts or anti-static springs connecting the ball, stem, and valve body.
Forged Steel Trunnion Ball Valve Size, Pressure Rating and End Connections
| Specification | Available Range or Standard |
|---|---|
| Nominal Size | 2"–48" (DN50–DN1200) |
| Pressure Rating | ASME Class 150–2500 |
| Flanged Ends | RF / RTJ |
| Butt-Weld Ends | BW |
| Flange Standard | ASME B16.5 / ASME B16.47 |
| Butt-Weld End Standard | ASME B16.25 |
| Face-to-Face Dimension | ASME B16.10 |
| Design Standards | API 6D / ISO 14313 / ASME B16.34 |
| Pressure Testing | API 598 |
Full-bore or reduced-bore configurations and two-piece or three-piece body arrangements can also be considered, subject to engineering confirmation.
Forged Steel Ball Valve Material and Seat Configurations
| Service Condition | Body Material | Ball and Internal Components | Seat Options |
|---|---|---|---|
| General Service | ASTM A105 | F316 / ENP | PTFE / RPTFE |
| Low-Temperature / Cryogenic Service | ASTM A350 LF2 | F316 / 17-4PH | PEEK / Metal Seat |
| Sour Gas Service | LF2 / Controlled-Hardness Steel | F316 / Duplex | PEEK / Metal Seat with Stellite |
| Corrosive / Marine Service | Duplex / Super Duplex | Inconel 625 / Monel | Hardfaced Metal Seat |
Low-temperature configurations are listed for service down to -196°C. The applicable material combination and pressure-temperature rating depend on the selected valve size, pressure class, and service conditions.
Soft-seated configurations use PTFE or RPTFE. PEEK and metal-seated arrangements provide alternative configurations for low-temperature and sour gas service, while hardfaced metal seats are available for corrosive and marine applications.
DBB Trunnion Ball Valve Sealing and Safety Configurations
| Configuration | Available Design |
|---|---|
| Double Isolation | Double Block and Bleed (DBB) |
| Seat Design | Double Piston Effect (DPE) / Single Piston Effect (SPE) |
| Sealing Direction | Bidirectional Sealing |
| Fire Protection | Secondary Metal-to-Metal Sealing |
| Stem Protection | Integral T-Head Stem / Stem Shoulder / Retaining Ring |
| Static Electricity Protection | Spring-Loaded Anti-Static Device / Conductive Contact |
| Stem Sealing | Adjustable Packing Gland; Graphite / PTFE-Based Packing |
| Body Sealing | Replaceable Body Gasket |
| Emission Control | Fugitive Emission Control |
Relevant design and testing standards include:
- API 607 / API 6FA: Fire-safe design and testing.
- NACE MR0175 / ISO 15156: Material requirements for sour service.
- ISO 15848-1 / API 641: Fugitive emission requirements.
The applicable standards and qualifications depend on the valve configuration and project specification.
Trunnion Ball Valve Actuation and Customization Options
Actuator-operated configurations can be supplied with mounting brackets, stem adapters, and actuator couplings matched to the selected valve. Electric, pneumatic, and electro-hydraulic actuation can be considered according to operating requirements.
Additional configurable items include:
- Body and Internal Materials: ASTM A105, ASTM A350 LF2, F316, Duplex, Super Duplex, Inconel 625, and Monel.
- Seat and Sealing Materials: PTFE, RPTFE, PEEK, and metal-to-metal sealing.
- End Connections: RF, RTJ, and BW.
- Bore Configuration: Full bore or reduced bore, subject to engineering confirmation.
- Body Construction: Two-piece or three-piece arrangements, subject to engineering confirmation.
- Stem and Anti-Static Components: T-head stem, stem retaining ring, anti-static springs, and conductive contacts.
- Packing and Gasket Materials: Graphite or PTFE-based stem packing and service-compatible body gaskets.
- Special Service Configurations: Low-temperature, sour gas, and corrosive-service material and sealing combinations.
OEM and private-label supply are available for project orders.
Manufacturing, Inspection and Delivery
Production quality control covers incoming material inspection, machining, assembly, and finished-valve testing.
| Inspection / Documentation | Details |
|---|---|
| Pressure Testing | 100% hydrostatic and pneumatic testing |
| Forged Body Inspection | Ultrasonic Testing (UT) |
| Non-Destructive Testing | Magnetic Particle Testing (MT) / Dye Penetrant Testing (PT) |
| Material Verification | Positive Material Identification (PMI) |
| Material Certificates | EN 10204 3.1 / 3.2 |
| Third-Party Inspection | Available for project orders |
| Export Documentation | Full export documentation package |
Typical production lead times are:
- Standard small-to-medium sizes: 6–10 weeks.
- Large sizes or high-pressure classes: 10–16 weeks.
- Special alloys and EPC projects: Subject to engineering approval.
Available trade terms include EXW, FOB, CIF, and CFR.
Request a Quote for Side Entry Forged Steel Trunnion Ball Valves
Send us your valve specifications, project datasheet, reference drawing, or required quantities to request a quotation.
Please include the available details:
- Valve size and pressure class
- End connection: RF, RTJ, or BW
- Operating medium and temperature
- Body and internal material requirements
- Seat and sealing configuration
- Required actuation arrangement
- Required quantity
We will review your requirements and provide a corresponding valve configuration and quotation for your project.
Contact UsHot Tags: side entry forged steel trunnion ball valve, China side entry forged steel trunnion ball valve suppliers, manufacturers, factory, Ball Valves Fully Welded Body, Fire Safe Forged Steel Trunnion Ball Valve, forged steel trunnion ball valve, Manual Forged Ball Valve, Side Entry Forged Steel Trunnion Ball Valve, Top Entry Forged Steel Trunnion Ball Valve

